Main Menu
Articles Home
Most Popular Articles
Top Authors
Submit Articles
Submission Guidelines
Link to Us
Bookmark
Contact Us





Translate this page
 


 
Home / Home / Home Improvement

Laying Vinyl Tile The Right Way

By:D. David Dugan


Vinyl Tile is still one of the best floor coverings to choose for kitchens and bathrooms. Ceramic tile is great, but the cost to have a professional install it can be prohibitive. The answer, vinyl tiles installed by you. You will save a lot of money you can use toward other home improvements you want to do.



Vinyl tile is also a great choice for other reasons. There are some beautiful choices of both style and color. There are so many different patterns and colors to choose from that you will want to take your time in choosing something that will enhance the beauty of your kitchen or bathroom.



In addition to that, vinyl tile is much better than linoleum for practical reasons. With a linoleum floor, one accident and the whole floor is ruined basically, because it is all one piece. When you buy vinyl tile, you buy extra squares. If an accident ruins one or two tiles, you replace them.



In this article I will help you learn how to install your own vinyl tile floor with confidence. Iím going to teach you the old school way of laying this beautiful floor covering. I call it old school, because I learned from tile layers that had been doing it for years before I started.



First, we need to start with the basics. I donít know what is on the floor where you plan to put down vinyl tile, so Iím going to show you what our preparation goals are. We want a nice smooth surface to lay our vinyl tile on.



Some people will tile over existing tile. This can be okay, but it is not the preferred choice. To do this right, you need to remove whatever flooring is there now, until you are down to either a smooth cement or wooden surface.



If there are cracks and valleys or unleveled surfaces, they need to be filled and smoothed out before we can start laying your vinyl tile. On cement or wooden surfaces, you can use cement to fill in and smooth the surface. You can also install plywood over the existing floor to achieve the surface your vinyl tile needs. You caulk in all the joints after installing the plywood. You can use Durok as well.



The goal, as I said before, is to have a smooth surface before you begin to lay vinyl tile. Otherwise, your tile will crack wherever pressure is placed on the tile over existing rough areas.



Now, buying the vinyl tile you want is next. There is self-adhesive vinyl tile that is very inexpensive. However, remember you get what you pay for. The adhesive on these tiles is not of great quality and you will be replacing them often. They are usually very thin as well, so they are easily damaged.



The thicker the vinyl tile, the more expensive and durable it is. That is the rule of thumb. Choose vinyl tile that has about 1/8Ē thickness or above and you will have a floor that will last a long time. So choose your style and color wisely. It will be with you awhile.



Now, the tools you will need are next. You will not need a tile cutter. That isnít the old school method. Using a tile cutter is tedious and slow, and your edges will never be tight. You will need a good razor knife, a small butane torch, a trowel with teeth along one edge for applying the adhesive, some old rags, and some mineral spirits.



A lot of experts will tell you to always begin in the center of the room when laying any kind of tile. However with kitchens and bathrooms, this is not always or even often the best method. Starting at one wall and working toward your cabinets is much better, because most of your tiles that need to be cut will be under the edge of the cabinets and not seen.



Starting along one wall, trowel on your adhesive, making sure there are ridges by using the toothed edge of your trowel. Do not go too far away from the wall as you will be laying tile there and donít want to have to reach while doing so.



Let the adhesive dry for about 15 minutes so itís very sticky. Lay your first tile at the corner and continue to lay a row, making sure you keep your tiles aligned. As you get to the end of your row, do not worry about the area that is left over where a whole tile will not fit in. We will take care of that last. However, remove the adhesive from that area so it wonít dry before we get back to it.



The adhesive you applied should have gone just a little further out than the row of tile itself, so now you have a row, with a little adhesive area waiting for the next row.



Now start back at the beginning. Apply a little more than a rowís width of adhesive, let it dry, then lay another row of tile, again making sure you align the tiles with each other so your lines are straight..



Once you have done the entire floor except those areas where a whole tile would not fit in, let the floor dry until tomorrow. Do not allow anyone to walk on the floor. The adhesive takes time to dry.



Now, once the adhesive is dry, we are ready to do the cutting in portion of your vinyl tile job. You should be able to walk carefully on the tiles without moving them by now. If not, you may have used too much adhesive and will have to wait longer, until you are sure it is dry.



Now, letís cut it in. Go to where your first row that ended with a little space left over. Apply some adhesive to that area, plus on the floor, along the wall where you are going to put in your cut pieces of vinyl tile. Let that dry, just as you did before for 15 minutes.



Now, take a full vinyl tile, matching it up with your tiles already on the floor at the bottom, lean it at an angle to the wall. Let me explain so you are sure to understand. You place the tile against the edge of the last tile in the row as if you were about to lay it down, but just let it lean against the wall at whatever angle it has to.



Now, you will need your razor knife and your small butane torch. Be careful with the little torch that you donít burn anything, please. If you are not comfortable with handling a small torch, this method is not for you.



Place the fingers of one hand on the top of the tile along the wall with very slight downward pressure. Wave the flame of the torch back and forth across the center of the tile about where you would like it to bend. Donít let the flame linger on the tile to melt it. Keep a distance so it only gets heated up.



As it gets hot, the pressure from your fingers will begin to push the vinyl tile downward, bending it into place. As soon as the tile is bent to the point where it is flat against the floor and the rest against the wall, set down your torch, pointing it carefully away from anything or anyone, and take your razor knife and cut along the bend right at the wall. It will cut like butter.



Now that tile fits perfectly to the contour of the wall. It also, because of the light pressure you applied as you pressed it down, has tightened up that entire row, so the vinyl tiles will not separate later. This is a floor that will last a long time and answers the problem of the tiles separating later.



Continue that same process for each row and everywhere the tiles need to be cut in. Then clean up. You are now an old school master at laying vinyl tile!



One last warning, as I said before, if you are not comfortable using flame, you should go ahead and use a tile cutter. It may not be as tight, but you can still do a good job with it without endangering yourself. This article was intended to pass on an old school method I learned and have used to lay many beautiful tile floors that lasted for years. I hope that by passing it onto you, the old way will not be lost.



Digg del.icio.us Blink Stumble Spurl Reddit Netscape Furl

Article keywords: home improvement, do it yourself, diy, home projects, home repair, remodeling, flooring, vinyl floor

Article Source: http://www.articles3k.com

D. David Dugan has a website, homeimprovement.divinfo.com to help homeowners find all the information they need about remodeling, home repair, building decks and carports, room additions, and more.








Related Articles
  • 1). How To Choose The Best Dehumidifier  By : Robert Thatcher
    The dehumidifier is considered as an air conditioner that has coils to remove the moisture from the air. Its coils come with hot and cold and a fan that would let the air conditioner to condense the moisture created by the cold coils of the dehumidifier. It will then produce a dry air that will go through the hot coil to bring back its original temperature.

  • 2). New Central Air Conditioning Units Can Save Energy  By : Carlo Morelli
    As many as eighty percent of the new homes being built in the U.S. are built with central air conditioning units installed. Central air just makes sense, as it keeps the indoor temperatures comfortable while filtering and dehumidifying the air. This is particularly nice for people who suffer from allergies or asthma. Fortunately, central air conditioning units can be installed in preexisting homes, too.

  • 3). Home Improvements Ė Planning  By : Raynor
    Home decorating is one of the keys to making the most out of a home. Do it right and you can turn a pedestrian home into a castle. Really good interior designers interview family members prior to making a plan and recommendations for changes in a homeís interior design and decoration. You and your family can benefit if you take the same approach when youíre in a do it yourself mode.

  • 4). Robot Vacuums: The Modern Way Of Cleaning  By : Jonathan Brunet
    Contrary to most popular beliefs, the concept of robotics is not exactly a new form of technology. According to history, robots have been on the market for so many years now. In fact, the very first documented construction of a working robot was a masterpiece of Jacques de Vaucanson in 1738. Since then, many have attempted and triumphed in building these remarkable mechanical devices.

  • 5). Little Giant Ladder Ė A Complete Guide To Working With One  By : Oliver Turner
    A major source of wounds and injuries in a workplace is due to fall from portable ladders. However, at times these wounds might prove fatal or can even end up making you paralyzed for the rest of your life. Little Giant Ladder ensures you the safety and makes you feel all the more secured. Here are some tips from the little giant ladder company to make you feel hundred percent protected.

  • 6). Home Repairs for Home Improvement  By : K Hoyng
    Sometimes we all get leaky faucets that cause annoying sounds during the night as the water drips down into the sink. Usually when faucets leak, it is caused by the wearing of the washers or O-rings. These leaks are relatively easy to fix in some instances, since homeowners can either replace the washers or O-rings or merely tighten the screws to repair the leak.

  • 7). Gas Fireplaces: Add A Touch Of Warmth To Your Home.  By : Joshu Crossman
    A fireplace includes various types of fuels for building fire. You can use coal, firewood, gas and much more. Today gas fireplaces are becoming popular as coal and firewood are hard to ignite and there are more restrictions on air pollution. Most modern fireplaces use gas as a fuel. There are various reasons why gas fireplaces are better than the other fireplaces.

  • 8). What features does a good cleaning supplies website contain?  By : Lee Harris
    There are so many different topics when it comes to cleaning. The first question you have to ask yourself is cleaning what? We clean everything, as human beings we are taught from our early childhoods to keep every thing clean and put things away when we are done with them. The question then becomes why? Why do humans need everything to be neat and clean, and in order.

  • 9). Discount Hardwood Flooring Ė Get It Cheaper From The Same Brand Names  By : Peter Leigh
    Discount hardwood flooring is available from all the major manufacturers of hardwood flooring materials. One form of cheap hardwood for flooring is engineered hardwood, but some of the discount brands are solid hardwood. This flooring is perfectly suitable for areas where you can nail, staple or glue the boards in place and is even suitable for placing over a concrete subfloor.

  • 10). Asbestos Roof Tile: Steps To Avoid Health Hazards  By : Kirsten Hawkins
    Introduction: Asbestos rooftile is basically an Asbstos contaminated roofing material. It is made up of natural minerals that are fiberous in nature.Fiberous quality of Asbestos was considered useful in various building materials. For exampleóPipe insulation,floortile, and fireproofing. Other roofing products such as shingles,tars,pitch and roof tiles were also prepared with the help of asbestos.



 


© 2013 articles3k.com - Privacy Policy